Skip to content
Robotic Arm

xArm 7

UFACTORY

xArm 7 by UFACTORY

Product highlights

  • Named xArm 7 has 7 arm axes, 3.5 kg maximum payload, 700 mm reach, 1 m/s maximum TCP speed and ±0.1 mm repeatability. Joint angular speed 180°/s is a separate measurement; repeatability is not absolute positioning accuracy.
  • Current named-model table and 1305 hardware manual give 14.3 kg arm-only mass. The support comparison instead gives 13.7 kg; exact historical revision/configuration mapping is not established, so the discrepancy is retained.
  • The named 7-axis arm remains distinct from other xArm variants, UFACTORY 850 and Lite 6. Shared comparison blocks do not transfer 850 mm reach, 20 kg mass or integrated Lite-base specifications.
  • Python/C++ SDKs, ROS/ROS 2, hand-guided teaching and browser-hosted UFACTORY Studio support integration. Simulation compatibility, external vision, grippers and a six-axis force/torque sensor remain separate software/tooling options.
  • Collision detection compares measured joint current with a dynamic model. Payload, center of mass, mounting direction and friction parameters affect triggering; this is not an included six-axis force sensor or an independently certified contact-force limit.
  • Current 1305 model codes are XF1305, XI1305 and XS1305. Controller masses/dimensions and Gripper G2 IP40 remain component data; the family’s 2018 introduction and varying starting prices do not establish this model’s first sale year or exact package price.

Product sources

Description

xArm 7 is the separately named 7-axis UFACTORY arm with 3.5 kg maximum payload, 700 mm reach, 1 m/s maximum TCP speed and ±0.1 mm repeatability. Current 1305 documentation and the support comparison disagree on arm-only mass. Studio and open SDK/ROS interfaces support integration; tools, controller choice and installation-dependent collision detection retain their scope.

industrialcobotprogrammablerosdev-platform

Specifications

Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.

PriceSource review · Not disclosed
WeightSource review · 14.3 kg in current 1305 manual/sheet; support comparison 13.7 kg; revision mapping unresolved
Arm reachSource review · 700 mm reach; not robot envelope or total span
Arm repeatabilitySource review · ±0.1 mm manufacturer repeatability; not absolute accuracy
HandsSource review · External flange tooling; gripper/vacuum/F-T sensor package not established
Degrees of FreedomSource review · 7 mechanical arm axes; tooling actuation is separate
PayloadSource review · 3.5 kg maximum; actual allowable load depends on TCP offset
SpeedSource review · 1 m/s maximum TCP linear speed; 180°/s maximum joint speed is separate
Back to catalog