Skip to content
Commercial Robot

RB-SUMMIT+

Robotnik

RB-SUMMIT+ by Robotnik

Product highlights

  • Current Gen3 Lite/6DOF/7DOF arm loads 0.5/4/4 kg and reaches760/891/902 mm are separate from carrier cargo and robot mass. Grippers are options, not a supplied general-purpose hand.
  • Current configured masses70/72/73 kg and736 x 614 x 645 mm body table differ from bare RB-SUMMIT65 kg/IP54. Installed-arm enclosure is IP22; chassis protection does not raise it.
  • Cargo conflict inside current PDF: headline up to 40 kg, table 45/43/42 kg for the three named arm versions. No silent choice, inferred corrected limit or arithmetic reallocation.
  • Older XL-GEN route redirects to RB-GEN+ with RB-SUMMIT+ body text:985-mm reach, 2.1–2.6 kg arm loads, 3 m/s, IP40 and conflicting5/10 h autonomy. Exact generation mapping is unresolved; these values are not substituted for the current Gen3 sheet.

Product sources

Description

RB-SUMMIT+ combines Robotnik’s mobile base with Gen3 Lite or Gen3 6/7DOF Kinova arms. Current arm loads are0.5/4/4 kg with separate carrier cargo, robot mass and reach rows. The sheet’s up-to40 kg cargo headline differs from its42–45 kg version table. The older XL-GEN route resolves to RB-GEN+ and uses RB-SUMMIT+ text with different geometry and arm ratings; generation mapping remains unverified.

commercialindustrialrosautonomous-navresearchinspectionmobile-manipulator

Specifications

Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.

PriceSource review · Not disclosed
WeightSource review · Configured Weight row Gen3 Lite 70 kg; Gen3 6 DOF 72 kg; Gen3 7 DOF 73 kg; separate arm row not added again
SizeSource review · 736 x 614 x 645 mm for all three current sheet arm versions; arm workspace/folded pose limits apply
Battery LifeSource review · Up to 5 h; manufacturer maximum, payload/duty profile unspecified
Max RuntimeSource review · Up to 5 h per named-model source; duty/load conditions unspecified
Drive modeSource review · Skid steering in current configured sheet; legacy skid/mecanum choices not automatically included
Arm reachSource review · Current arm choices: Gen3 Lite 760 mm; Gen3 6 DOF 891 mm; Gen3 7 DOF 902 mm; legacy 985 mm not inherited
Transport payloadSource review · Current PDF carrier row: Gen3 Lite 45 kg, Gen3 6 DOF 43 kg, Gen3 7 DOF 42 kg versus same-sheet headline up to 40 kg; unresolved
PayloadSource review · Arm: Gen3 Lite 0.5 kg; Gen3 6DOF/7 DOF 4 kg; current installed-arm choices
SpeedSource review · Up to2.5 m/s per current page/sheet; older route3 m/s is an unmapped legacy configuration
IP RatingSource review · IP22 per current installed-arm page/sheet; older routeIP40 is an unmapped legacy configuration
TerrainSource review · Indoor/outdoor R&D; current sheet 80% maximum slope with unspecified load/surface/arm-pose conditions
Back to catalog