Skip to content
Commercial Robot

GoPal P35

Robotize

GoPal P35 by Robotize

Product highlights

  • The named GoPal P35 specification section and the six-column brochure table list 120 kg body mass and 960 x 660 x 295 mm body dimensions. These are separate from load-carrier envelopes and stationary charger dimensions; conflicting page-summary values remain marked in the selected fields.
  • The P35 page, current fleet page and brochure list 300 kg; the brochure includes the top module. The homepage card says 250 kg and the page summary says 500 kg. Selected capacity remains conflicted. Partner configurations can support higher loads, but no generic higher capacity is inferred.
  • Maximum travel speed is 2.4 m/s and per-charge autonomy is 8–14 hours depending on load. Up to 20 km is a separate distance claim. Differential drive and free navigation with hybrid localization do not establish numeric navigation or docking accuracy.
  • The 24 V LiFePO4 P35 uses primary inductive charging and emergency USB-C. Its page gives 45 minutes from 30% to 95%, while the brochure gives 55 minutes for the same window. The 20 kg, 505 x 790 x 258 mm, 1000 W charging station is separate from the robot.
  • Floor limits are 2 mm maximum edge height, ±2% gradient and at least 0.70 friction coefficient. The sources list -10°C to +45°C and up to 95% non-condensing humidity without a whole-model IP rating. Safety scanners, cameras, bumpers and standards claims are manufacturer statements, not independent installation certification.
  • P35 has 24 V unregulated top-module power, a 20 A fuse and CAN/Ethernet control plus safety signals. Standard mechanical mounting uses four M8 threaded holes. Nord Modules and ROEQ are partner integration choices; their module and cart names are not additional Robotize robot models.
  • The page lists 960 mm minimum lane and 760 mm passage; the brochure lists 1000 mm minimum aisle and 900 mm doorway for bare P35 without top module, plus 2090 mm minimum two-way aisle. The page gives 660 mm turning radius versus a brochure 1300 mm rotation diameter; the brochure also has inconsistent imperial labels. Configuration and layout need confirmation.

Product sources

Description

GoPal P35 is a modular platform for carts, cages and conveyors. Its 300 kg load includes the top module; higher partner configurations require a separate load assessment. Exact-model data and the manufacturer brochure differ from other summary blocks. Charging and maneuver measurements retain their source conflicts.

commercialindustrialwarehousedeliveryautonomous-nav

Specifications

Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.

PriceSource review · Not disclosed
WeightSource review · 120 kg
SizeSource review · 960 x 660 x 295 mm
Battery LifeSource review · 8–14 h depending on load
Charging timeSource review · 45 min from 30% to 95%; brochure lists 55 min
Drive modeSource review · Differential drive
Minimum aisle widthSource review · 960 mm web / 1000 mm brochure; 2090 mm minimum two-way (bare AMR)
Turning radiusSource review · 660 mm from robot center; brochure 1300 mm rotation diameter
PayloadSource review · 300 kg including top module; configuration-specific higher loads require confirmation
SpeedSource review · Up to 2.4 m/s; load dependent
TerrainSource review · Maximum edge 2 mm; gradient ±2%; minimum friction 0.70
Back to catalog