
Product highlights
- Autonomous tugger uses 3D LiDAR mapping without floor guide wires, tape or magnets
- Cyngn Insight and an onboard touchscreen support route changes, dispatch and manual override
- EasyLaunch rental combines the Motrec-based vehicle, autonomy, mapping, training and support
- Current autonomous Motrec MT-160 specifications give 65 × 30 × 55 in outer dimensions and 1,250 ± 100 lb mass depending on options. The 18 × 30 in deck is a separate area, not the vehicle footprint.
- Current towing capacity is 12,000 lb; maximum onboard deck load is separately 500 lb. Autonomous speed is up to 4 mph and manual speed up to 6 mph; these are distinct operating modes, not two conflicting autonomous ratings.
- The listed battery is 12.4 kWh lithium-ion at 48 V. Battery operation is up to twelve hours and charging is listed as five hours. Speed, load weight and usage affect endurance; exact charge-state/test conditions are unspecified and no independent continuous-duty guarantee follows.
- The current specification states a 53 in turning radius, 59 in minimum aisle and 2.5% maximum slope. Percent grade is not degrees; commissioned cart-train clearance and environmental limits still require deployment assessment.
- October 2023 preview figures were 6,000 lb towing and 54 in turn radius. The September 2024 release explicitly describes the upgrade from 6,000 to 12,000 lb; historical figures are not silently merged with today’s configuration.
- The sensor suite lists 360° 3D LiDAR, 2D safety LiDAR, an IMU and wheel encoders. Virtual Bumper, emergency stops, LEDs and audio cues are developer safety functions. The catalog’s B56.5-compliant wording is attached to Virtual Bumper, not independently verified certification of every complete vehicle, site or cart train; three-times-faster reaction is a supplier comparison.
- The datasheet lists auto-unhitch and blue light as optional features, and LTE as optional alongside Wi-Fi 5 (802.11ac). Route dispatch, manual takeover and automatic charge/home missions are software functions; EasyLaunch has no numeric public price or guaranteed deployment/ROI result. The catalog lists pneumatic tires while the linked datasheet says solid/non-marking; exact supplied tire configuration remains unresolved.
Product sources
- Cyngn — publicly linked Autonomous Motrec MT-160 datasheet PDF; extracted text only · Developer source · Checked 2026-11-02
- Cyngn — current DriveMod Tugger product page: towing versus deck load and autonomous speed · Developer source · Checked 2026-11-02
- Cyngn — current 24-page Cyngn catalog; extracted text and coordinate review only · Developer source · Checked 2026-11-02
- Cyngn — current DriveMod safety architecture · Developer source · Checked 2026-11-02
- Cyngn — DriveMod safety brochure; extracted text only · Developer source · Checked 2026-11-02
- Cyngn — July 2023 Motrec MT-160 partnership with historical 6000-lb rating · Developer source · Checked 2026-11-02
- Cyngn — September 2024 next-generation 12000-lb Tugger build and upgrade · Developer source · Checked 2026-11-02
- Cyngn — October 2023 original 6000-lb Tugger preview; future deployment milestones · Developer source · Checked 2026-11-02
Description
DriveMod Tugger is Cyngn’s autonomous integration of a Motrec MT-160 tow tractor. Current developer specifications describe the 12,000 lb towing configuration with a separately rated 500 lb deck load, 65 × 30 × 55 in dimensions and 1,250 ± 100 lb mass depending on options. Maximum travel is 4 mph autonomous or 6 mph manual; battery operation is up to twelve hours depending on load/speed/usage, with five-hour charging and an unspecified charge window. Current turning radius is 53 in, minimum aisle 59 in and maximum grade 2.5 percent. The October 2023 preview’s 6,000 lb/54 in figures predate a documented 2024 upgrade. 3D-LiDAR mapping, FMS dispatch, manual override and redundant stop functions support site-specific workflows. Auto-unhitch and LTE retain attachment/optional scope; no blanket whole-system certification or guaranteed ROI is established.
Specifications
Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.
| WeightSource review · | 1,250 ± 100 lb depending on options (Cyngn autonomous Motrec MT-160 specification) |
| SizeSource review · | 65 in L × 30 in W × 55 in H (Cyngn autonomous Motrec MT-160 specification) |
| Battery LifeSource review · | Up to 12 h per charge; varies with speed, load weight and usage (developer) |
| Charging timeSource review · | 5 h (Cyngn autonomous Motrec MT-160 specification); state-of-charge window unspecified |
| Drive modeSource review · | Autonomous 3D-LiDAR mapped routes with FMS/touchscreen dispatch and manual override |
| Minimum aisle widthSource review · | 59 in minimum (current autonomous Motrec MT-160 specification); deployment clearance still required |
| Turning radiusSource review · | 53 in (current autonomous Motrec MT-160 specification) |
| Transport payloadSource review · | 500 lb maximum on-vehicle deck load; towing capacity is separate |
| PayloadSource review · | 12,000 lb maximum towing (current DriveMod/Motrec MT-160); separate deck-load rating |
| SpeedSource review · | Up to 4 mph autonomous; 6 mph manual (Cyngn autonomous Motrec MT-160 specification) |
| TerrainSource review · | Maximum slope 2.5% (current MT-160 specification); industrial indoor/outdoor use; not 2.5 degrees or an IP rating |

