Product highlights
- ROS 2 education/research platform uses iRobot Create 3, Raspberry Pi 4B and RPLIDAR A1M8
- Standard TurtleBot 4 uses OAK-D-Pro camera, UI board, user display/buttons and a sensor tower
- Manufacturer table specifies 2 h 30 min to 4 h operation depending on load, separately from 2 h 30 min charging
- Maximum travel speed is mode dependent: 0.31 m/s in safe mode and 0.46 m/s without safe mode; the latter is not an unconditional operating recommendation
- Charging dock is listed as included; the manufacturer controller is listed for standard TurtleBot 4 and not included for Lite
- The standard table maximum payload is 9 kg; modified over-9-kg integrations require separate assessment and are not imported as default carrying capacity
Product sources
- Clearpath Robotics — turtlebot manufacturer manual · Manufacturer source · Checked 2026-11-02
Description
ROS 2 research/education platform built on iRobot Create 3 with Raspberry Pi 4B, RPLIDAR A1M8 and OAK-D-Pro camera. Mode-dependent speed, load-dependent endurance, charging time and standard/Lite accessory differences remain explicit.
researcheducationaldev-platformprogrammableopen-source
Specifications
Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.
| PriceSource review · | Not disclosed |
| WeightSource review · | 3.945 kg |
| SizeSource review · | 342 x 339 x 351 mm |
| Battery LifeSource review · | 2 h 30 min to 4 h depending on load |
| Max RuntimeSource review · | Up to 4 h (upper end of load-dependent manufacturer range) |
| Charging timeSource review · | 2 h 30 min |
| PayloadSource review · | 9 kg maximum in the standard manufacturer table |
| SpeedSource review · | 0.31 m/s in safe mode; 0.46 m/s without safe mode |
| TerrainSource review · | Indoor research and education; 4.5 mm ground clearance |

