Skip to content
TyBOT by Advanced Construction Robotics

Product highlights

  • Gantry robot locates and ties horizontal rebar intersections on bridge decks
  • Operates on project edge forms or screed rails without pre-mapping or BIM input
  • Expandable working width supports different deck layouts; crews handle remaining installation tasks
  • Revision C specifies 900 ties/hour minimum and 1200-plus observed active tying. These ratings exclude a guarantee for downtime, wire changes or an entire shift.
  • The 1864 kg mass belongs to the base unit. Truss end-to-end widths of 9.5/20.5/38.5 m remain separate from the 10-117 ft adjustable rail span; named size settings do not create additional robot models.
  • The generator is rated for up to ten hours without refueling. The brochure’s 12-plus-hour Belly Box battery powers the supervisor interface, and optional one-ton carry hoists do not establish standard robot payload.
  • Tie patterns cover all, alternate or every third intersection. Rail travel is rated at 0.2 m/s; bar spacing, rail support and span-dependent grade limits constrain installation. Rain-or-shine marketing is not a numeric ingress rating.

Product sources

Description

Gantry robot autonomously finds and ties horizontal rebar intersections while a supervisor monitors operation and reloads wire. Manufacturer specifications separate base-unit mass, variable truss dimensions and rail span. Generator fuel endurance and active tying rate are conditional ratings; optional carry hoists and transmitter batteries are separate components.

commercialconstructionrebar-tying

Specifications

Sources cover the marked fields only. Unmarked values have not been checked in this review; manufacturer figures are not independent test results.

PriceSource review · Not disclosed
WeightSource review · 1864 kg base unit; configuration-dependent; wheel loads are separate
SizeSource review · Truss end-to-end width: base 9.5 m, standard 20.5 m, full 38.5 m; not rail working width
Max RuntimeSource review · up to 10 h without refueling; generator-powered manufacturer rating
Working widthSource review · 10-117 ft screed-rail span (approximately 3-36 m); setup-dependent, not truss end-to-end width
ThroughputSource review · 900 ties/h stated minimum; 1200+ ties/h observed active rate; not guaranteed whole-shift average
SpeedSource review · 0.2 m/s maximum longitudinal travel; approximately 0.66 ft/s; not tying rate
TerrainSource review · Bridge decks on screed rails or edge forms; portable rail and bogie accessories depend on installation
Back to catalog